If you’ve got a hankering to do do woodworking, you are in good company. Many people aspire to be excellent wood crafters, but few actually achieve that goal. Learning something new is always a bit intimidating, but this needn’t be. You can learn what you need to know to get started by reading the following article.

Tape can be your friend when gluing stained wood together. Place the two pieces of wood together in a clamp and tape the seam before applying the glue. Carefully cut the tape along the joint and then separate the two pieces of the wood and apply the glue along the joint. Clamp together and allow to dry. The tape will keep the glue off the wood and is easy to remove once the glue is dried.

Stair gauges can be used for crosscut guides. To use, clamp the gauges to a carpenter square. Then use a pencil to mark the notches. When you clamp them on the one tongue of the carpenter’s square it will become a good crosscut guide for your circular saw.

Take the time to plan out your woodworking project step-by-step before you even begin. Doing this will help to ensure that you are going to get the results that you are looking for. If you do not plan ahead it is likely that you will make an error that could ruin the entire project.

If there is a joint in your work that does not fit together properly, this cannot be fixed with glue. While it may seem like the simple way to fix things, it will only work temporarily. The best thing to do would be to start over and be more careful the next time.

Do you have door hinge screws that have worked themselves loose, and you can’t tighten them into the wood at all? A golf tee can solve this. Remove hinges and door from door frame and lightly tap one golf tee inside each of the screw holes. Cut off the excess golf tee and then reinstall the door. The golf tee will help the screw bite into something.

If woodworking is new to you, one of the most important pieces of advice to take is to thoroughly read all plans and instructions before you begin anything. Understand the plans and makes sure they aren’t missing any steps or information. If there is anything that you don’t understand, see if anyone at your local home improvement store can help you.

To help your paint and stain brushes stay soft and subtle suspend your brushes in paint thinner. One of the best items to do this is those plastic pop-up baby wipe dispensers. The top of the container will securely hold your brush and also helps prevent your paint thinner from evaporating.

Make accurate lines and measurements by using a drafting square instead of a drywall square, yardstick or ruler. Drafting squares are smaller and easier to manage and are much more accurate than any of these tools. This is a handy tool to keep at your side because it is smaller. Additionally, drafting squares are very affordable, selling for about five bucks at any art supply store.

Monitor your blades periodically to make sure they stay sharp. Sharp blades on your saws can save you a lot of time when you’re woodworking. That is the reason you need to check them regularly for performance reasons. Have a schedule in place where you check regularly. That will make sure you have sharp blades when you need them.

Take time to learn about the different types of wood and where they can be used. Each type of wood has its own benefits. For example, soft woods are generally cheaper; however, they tend to warp over time. Teak is a perfect wood for outdoor use; however, it is very expensive.

Be sure to keep all of your old cans of stain. Stain is expensive, and can come in handy if you wish to use a particular color again. Additionally, stains do not set up like finish does. If there is a skin on top, remove it, and the stain is as good as new.

Every good woodworking shop needs a quality combination square. It is needed for almost every job you’ll tackle. It makes a good depth gauge, using the straight side. It is, of course, perfect for miter cuts. Most have a level built right in. A good combination square is a must-have tool, right up there with a hammer and drill.

In summary, you can achieve your woodworking goals by applying the tips above. Keep learning about the craft, and soon you will be an expert. It only takes the desire and the time to hone your woodworking skills. Soon, you’ll be making anything your heart desires and having fun to boot!

Woodworking 101: Everything You Need To Know was originally published on Spring