Today, choosing to do a woodwork project offers lots of opportunities for you that won’t require purchasing elaborate and expensive tools. If you’re a beginner, look into different kits and shortcuts that can help you create a professional-looking project without being a master woodworker. Use the suggestions below to consider some projects that you can undertake without years of woodworking experience.

Create your own sanding blocks. Cut six 3/4″ pieces of plywood for each sandpaper grit. They should be 2.5″ x 4.75″. Use spray adhesive on both the cork tile square and your blocks. Stick a block to the cork, making sure to cut the cork flush with a utility knife. Spray adhesive on a sheet of sandpaper, and stick it to each block of cork, facing down. Lastly, cut the sandpaper to be flush with the cork. Finish by labeling each block.

Organize your shop’s extension cords to keep your shop safe and tidy. You can make your own cord keeper with nothing more than a scrap piece of wood. Simply cut a piece of wood in the shape of an I and wrap each of your extension cords around the wood.

When working with stains, dab a small amount in a test area to see how it comes out. This way you will avoid any surprises in case the color of the stain looks different after application. Wood is unpredictable so you’ll want to test it first.

Clean your saw’s teeth before cutting lumber. To thoroughly clean your saw blade dip a shop rag into a little acetone and wipe the blade thoroughly. Additionally, using a piece of sandpaper that has a fine grit will remove any sap or gumminess from your skill saw’s cutting blades.

Take your time when using an electrical saw to cut your wood. If you are doing a woodworking project and try to do it quickly you are risking injury as well as are more likely to make a mistake. Be sure to not even try to start something if you do not have plenty of time.

Make sure your workbench is the proper height. It really can make a big difference. It needs to fit you and how you work. Usually if you are around 5’6″ to 5’9″ you probably need one that is between 33″ and 36″ high. If you are 5’10” or taller, you may need one that is between 35″ and 37″ high. Use your bench at its current height to determine if you need to change it to work better for you.

Always follow the owner’s manual when using one of your woodworking tools. Not knowing the manual’s recommendations can result in injury or failure of your tool, and you surely do not want either of these to happen to you. If you have not yet read your manuals do so right away!

Learn about using pilot holes. This is pretty simple to do. When driving a screw or hammering a nail into a little piece of wood or getting pretty close to the edge of a piece, it tends to split. Sometimes it’s unavoidable to put a fixing into a place like this. However, drilling a hole through the joint that’s a bit smaller than the fixing can prevent it from splitting.

If you’re a new woodworker, you should read all your plans before staring a project. Make sure they are complete without any missing information. If you cannot understand them or something is missing, someone from a local home improvement center may be able to help you.

Always disconnect the power of your power tools before you change blades or do any maintenance work on it. It is very dangerous to leave the electrical tool plugged in when you change blades. If the tool turned on, it would be a catastrophe. Always remember this tip to stay safe while woodworking.

Of the surface of the wood in your project has been dinged or dented by accident, you need to remove the blemish before you finish it. If the fibers of the wood are only crushed, not torn, you can use steam to fix the problem. Fill the depression with a drop or two of water and use a hot iron over a damp cloth to level the dent.

If you want to stain your wood piece, make sure to use a finer grit sandpaper if you want a lighter color. That is because the big scratches left by coarse paper allows more of the pigments to saturate the wood surface. Therefore, if you want the color to be lighter, make sure you’ve sanded with fine sandpaper.

There are many options for you to express your creativity and skills without being a master woodworker when it comes to projects around your home. Looking around for modern ways to produce woodworking projects to enhance your home might be easier than you think. Use the tips above if you’re considering a woodwork project but you’re worried that you don’t have enough skill to undertake your project.

Great Advice For Having Fun With Woodworking was originally published on Spring