When I was a child, my grandfather had a workshop in his basement. He would supply us with wood, tools and hardware and we would create a myriad of imaginative crafts. If you have grown up with a love of woodwork, the tips below will help you master your craft.
Safety is of utmost concern when you are doing any time of woodworking project. Make sure that you always use tools properly and wear the proper safety equipment. Always keep safety guards in place on power tools. You don’t want to start in your workshop and end in a hospital bed.
If you will be re-coating an existing finish, be sure that the surface is clean and free of any wax or oils. Then, let it dry completely, and lightly scuff the surface with a 220-grit sandpaper so that the finish you are applying will have something to hold onto.
When you are tackling the sanding portion of your woodworking project be sure that you are using the best type of sandpaper. There are many different types available, and using the wrong type can lead to your project being ruined. If you are not sure you are using the right type you can find the correct information online with the click of a few buttons.
When staining woods, always test in a hard to see area before moving forward. In fact, if you’ve got a piece of scrap wood, that’s even better. You never know how a type of wood will take to stain, so it’s best to find out in a place that won’t be an issue later on.
If you are working with wood, it can be very dangerous to have a messy workshop. Do everything you can to keep your work area clean and well-maintained. Every time you are done with a specific tool, out it away before you get another. It may seem like this is time consuming, but you won’t have any reason to clean up later.
Always clean up sanding dust thoroughly before staining or applying a topcoat. If you want a smooth finish, dust is your enemy. Use a vacuum over blowing dust into the air because it settles back onto the wood, and use a damp cloth to ensure all dust is removed from the wood in your final cleanup prior to staining or applying a top coat.
When you find a nice level spot on your workshop floor for your table saw, it can be difficult finding the same spot after you put your saw away. When you do find a level spot, use duct tape on the floor so you know where to position your table saw next time you need it.
Protect your ears. Woodworking machines make a lot of noise. Too much exposure to these loud sounds can harm your hearing over time. You can either purchase a high quality set of headphones or use disposable ear plugs. Whatever choice you make, be sure that they are always worn inside the shop.
If you plan on applying any gloss or stain to a piece of wood, it is very important that you sand it down first. Failing to do this step will result in a wood surface that is not very smooth. Use sandpaper to smooth things down then make sure all dust s removed by brushing it with a cloth.
Never cut any pieces of wood without checking for nails, screws and other metal. While donning a pair of goggles keeps your eyes protected, you are still at risk for other injuries. Inspect every piece of wood whether you are re-purposing it or using new lumber. You are better safe than sorry with this safety tip, and checking the boards only takes a few minutes of your time.
Go to the art supply store and get a drafting square. Carpenter squares are a hassle, and drywall squares are notoriously inaccurate. When you need an exact square several feet in width and length, a drafting square is a surefire winner. Once you use it a few times, you’ll likely use it just as much as a tape measure.
It is possible to put a water-based finish on top of an oil-based stain. However, you must wait a full twenty-four hours for the mineral spirits to fully evaporate from the oil-based stain. If the weather is wet or cold, it is better to wait another twenty-four hours before applying the finish.
If you can take your love of working with wood and pass it on to your kids, you will imbue them with skills that last a lifetime. Use these tips to give them the right advice when it comes to completing their projects. That will ensure that they are able to keep this hobby going well into adulthood.
How To Put Your Workworking Skills To Practice was originally published on Spring